Huangjiahe,Shushan Street Xiaoshan District Hangzhou City Zhejiang China
86-571-82392772 86-571-82393580
|
| Product Introduction ： | ||
Description This product is a new type of two-part anchor adhesive for
construction structure (JS-201, also named strong type). The
adhesive has the advantages of fast-cure, high-strength, great
anchor force and medium resistant as adhesion tovarious substrates
(concrete, stone materials, brick, rock etc.) and metal anchor
stick, and so is widely used in anchor stick fixture of concrete,
stone materials, brick, rockas well as adhesion to other building
assemblies. Characteristic 1. This product is two-part fast cure anchor adhesive for
construction structure at room temperature. 2. This product has excellent properties of bearing promptly the
loads imposed on construction structures; strong adhesion and great
anti pull force. 3.Operations can be made conveniently over the wide temperature
rangs of-10℃~40℃ with good technological property. 4. This product is a rind of adhesive of water-resistant,
medium-resistant and anti damp with good seal. 5. The application field of this product is various, such as
adhesion to concrete, stone material, marbles and metals. Where to use 1. Anchor-fixture for bases of various equipments. 2. Plantation of reinforcing bar and anchor-fixture of anchor bolt
in various construction structures. 3. Protective support provided by anchor-fixture to domes and walls
of mine corridor. 4. Anchor-fixture of railway and rails and insulated anchor-fixture
of rails. 5. Anchor-fixture of installation of curtain wall and chemical
equipment, pipeline and billboard. 6. Various anchor-fixture in the projects of hydraulic equipment,
dock, road, and bridge construction. Main Technical Properties(Only for Reference) Items
Conditions
Main lndex Reference Measurement Standard Steel-steel shear
strength
25℃,72h
≥12MPa GB7124 Anchor force
12thread
steel
Technical codes of 10times of diameter deep
≥40KN building
anchor bolt Anchor force
12thread steel
Reinforced Technical codes of 15times of diameter deep bar
Break building anchor bolt Application method 1.Drill: Form holes of desirable diameter and depth with impact
drill. 2.Clean dirty: Blow away the floating dirty in holes with
compressed air. 3.Mixture: Stir uniformly in the package of composition A and weigh
the compositions according to the ration of A:B=100:3 4.Fill anchor adhesive: Imject the: mixture into holes without air
bubble. 5.Anchor-fixture: Plant the anchor-stick (or reinforcing bar) in
the holes and erase surplus adhesive. 6.Curing :Cure no less than 8 hours at the room temperature after
plant the anchor-stick vertically. Packaging Two kinds: One：Composition A 1KgComposition B 50g Anther：Composition A 10KgComposition B 500g(250×2)． Noticeitems 1.This product should be stored in the shady, dry and good
ventilation warehouse with 3 months of shelf time commonly. 2.Don't compound too much adhesive, properly compound as use. 3.Clean hands with acetone firstly and then wash with water as this
product contacts with your skins. | ||
| Back | ||
See more products from this supplier.
Do you want to show products of your own company? Join FREE now!
